Waltron’s 9031CX Sodium Analyzer combines simplified design with uncompromised performance. This economic option can save your budget as well as mounting space.
Common 9031CX Sodium Analyzer application points in a boiler system for online sodium measurement include: make-up water, condensate, boiler feedwater and saturated steam/main steam.
Please contact us for panel mount version.
Large user friendly color touch screen interface
Compact size
Wide analysis range: 0.1ppb – 10ppm
Quick connect electrodes and probe positioning clamps
Two 4-20 mA isolated current outputs
Low reagent and standard consumption
Internal data logger set to store readings every 10 minutes for 30 days
Minimal maintenance required
Automatically stores last 10 calibrations and alarms
Reagents: Ammonium Hydroxide (standard) or Di-isopropylamine (optional)
MODBUS and PROFIBUS connections coming soon!
PERFORMANCE
Range
0.10ppb – 10ppm
Accuracy
±5% of reading or ±0.1ppb (whichever is greater) within ±5°C of calibration temperature
Reproducibility
±5% of reading or ±0.1ppb (whichever is greater) at constant temperature
Response Time (approximate)
90% of 1-10ppb step: less than 4 minutes; 90% of 100-1ppb step: 5 minutes
Temperature Compensation
Automatic
pH Compensation
Alkaline vapor buffer: 0.88 SG (28% to 30% NH3) ammonia above 0.5ppb sodium, 99% diisopropylamine solution below 0.5ppb sodium
Calibration
Manual calibration
Current Outputs
Two isolated 4-20mA current (analog) outputs
Digital Outputs
Communication interface via RS-232 & RS-485 using MODBUS RTU protocol
Alarms
Three voltage-free contacts, alarm points set from transmitter rated at 2A, 250VAC (non-inductive)
Power
Wide range of input power supply 90VAC – 250VAC
Certification (on request)
Meets low voltage and low electromagnetic compatibility directives
SAMPLE DELIVERY OPERATING CONDITIONS
Sample
Temperature: 41 – 131° F (5 – 55°C); Flow 150 – 400 ml/min
Ambient Temperature
32 – 131°F (0 – 55°C)
Pressure
5 – 30 psig (0.35 – 2.07 bar)
Composition
Sample should be filtered to 60 microns, free of film forming compounds
MECHANICAL
Construction
Transmitter – high strength ABS,IP65 (NEMA 4x)
Wet section – high strength ABS and sheet metal,all wetted parts stainless steel or PVC,IP55 (NEMA 4)
Dimensions
Transmitter: Height = 10.92” (27.74 cm), Width = 7” (17.78 cm), Depth = 3.54” (8.99 cm)
Wet Section: Height = 18.25“ (46.36 cm) including drain, Width = 11.25” (28.58 cm), Depth = 7.63” (19.38 cm)
Mounting
Four key-style holes: Height = 0.86” (2.18 cm), Top Width = 0.281” (0.714 cm), Radius = 0.28” (0.711 cm) Horizontal: 9” (22.86 cm), Vertical: 12.875” (32.70 cm)
Weight
23 lbs. (10.44 kg)
Wiring
Eight (8) conduit knockouts
Piping
Sample Inlet: 1/4” (0.635 cm) OD Swagelokt, Drain: 3/8” (0.953 cm) OD tube
Distance
Up to 325 feet (100 meters) on request
Finish
Corrosion resistant
Reviews
There are no reviews yet.