3042 Phosphate Analyzer
9031CX Sodium Analyzer

3041 Silica Analyzer

In Stock

Compare

Waltron’s 3041 Silica Analyzer is the first choice for online water analysis of dissolved silica in ultrapure water applications.

The 3041 is trusted world wide to deliver accurate and reliable readings with minimal maintenance and low total cost of ownership. Common application points in a boiler system for online silica measurement include: make-up water, condensate, boiler feedwater, saturated steam/main steam and cooling water.

 Accurate and wide-range analysis


 Multi-stream available


 Fast loop reservoir


 Adjustable cycle and calibration frequency


 Automatic calibration and validation (QA/QC)


 Compact design


 Color touchscreen display


 Grab sample capability


 Internal datalogger


 Low reagent level alarm


 No compressed air required


 Automatic start/stop based on sample flow detection


 Minimal analyzer maintenance


 Panel mounting bracket available for Hach 5000 replacement

 

PERFORMANCE

Range
0 – 500ppb, 0 – 5ppm; 0 – 150ppm, 0 – 300ppm


Accuracy
+/– 1 ppb or +/– 2% of reading, whichever is greater


Reproducibility
+/– 1 ppb or +/– 2% of reading, whichever is greater


Sampling Frequency (Cycle Time)
One reading every 20 mins, adjustable


Required Maintenance
Monthly or quarterly replenish reagents; Quarterly replace tubing


Reagent Consumption (approximate)
3 reagents, 2L each per month (optional 7.5L for 3 months)


Sensor Classification
Colorimetric with glass flowcell and LED source


Application
10-45°C analyzer (50-113°F)


Ambient Temperature Range
10-45°C analyzer (50-113°F)


Atmospheric Pressure Range
No Limits


Humidity
Up to 90% not condensable


Unit Dimensions
Height=23.6”(60 cm), Width=15”(38 cm), Depth=8.3”(21 cm)


Positioning and Installation Details
Wall mounting, bench supported, or panel mounting (optional)


Weight
17 kg (37.5 lbs.


Degree of Protection
IP55 (NEMA 4): Wet section, IP65 (NEMA 4x): Electronics


Alarms
2 or 4 configurable alarm relays (Result, loss of sample, fault)


Power Supply (on request)
110-220Vac, 50-60 Hz 80 VA


 

Certification (on request)
Meets low voltage and low electromagnetic compatibility directives

SAMPLE DELIVERY OPERATING CONDITIONS

Temperature Range
5-55º C (41-131º F)


Inlet Sample
100–500 ml/min, atmospheric, flexible tubing O.D. 1/4″(6mm)


Outlet Sample
Atmospheric, waste tubing O.D. 3/8″(9mm)


PH 
3-12


Sample Conditioning Requirements
Filtering between 10 and 60 micron, depending on the matrix, needed only to avoid clogging.


Materials in Contact with Sample
Glass, Silicone, Plexiglass, Stainless Steel AISI 316

SIGNAL OUTPUTS

Analog Outputs
4-20mA (galvanic isolator module available as option) or 0-5V)


Serial I/O for Signals
Serial data output RS232; RS485; MODBUS; PROFIBUS

OPERATIONAL CALIBRATION

Single/Multi Point
Multi-Point: zero and mid range


Matrix Corrections
Yes, sample blank correction


Manual/Automatic
Both


Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “3041 Silica Analyzer”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Your custom content goes here. You can add the content for individual product
Back to Top