THIẾT BỊ KHÍ NÉN, THỦY LỰC

Air Jets Combine with Liquid Ring Pumps to Deliver Deep Vacuum when Steam is Not Available Suction Capacity: 1,000 ACFM or lower (1,700 m3/h or lower) Vacuum Range: 0.4 to 2 inHgA (13 to 68 mbar abs.)

Đọc tiếp

Compare

Wishlist

AT

Suction Capacity: 400 to 2,800 ACFM (680 to 4,750 m3/h) Vacuum Range: to 0.8 inHgA (to 30 mbar abs.)

AWS, AWD & AWL series

The AW liquid ring vacuum pump are available in either single (AWS) or two stage pumps (AWS) and has a capacity of 170-37500 m³/h deliver vacuum levels down to 30mbar(a).

BIO GAS BLOWERS/COMPRESSORS

Available in wide range with pressure upto 4.0 bar ‘g’ and flew upto 20,000 m3 / hr. in various combination. These are either root type blower / compressor. Sliding Vane Type Compressor and Centrifugal Gas Blower depending upon pressure.

Booster Hybrid Vacuum Systems

Vacuum Boosters Combine with Liquid Ring Pumps to Deliver Efficient and Economical Vacuum Solutions Suction Capacity: 500 to 20,000 ACFM (850 to 34,000 m3/h) Vacuum Range: to 8 inHgA (to 270 mbar abs.)

CENTRIFUGAL FANS AND BLOWERS

Static pressure upto 1800 mmwg in single stage,Higher static pressure by multi-staging. ID / FD FANS Suitable for positive conveying and negative suction. Manufatured out of special materials for Gas conveying and fitted with Mechanical & Semi-mechanical seals. Capacity : Upto 400000 M3/Hr Pressure : Upto 2100 mm WC in single stage

CL

Suction Capacity: 140 to 14,800 ACFM (240 to 25,150 m3/h)

CONDENSER EXHAUSTERS

Swam offers advanced design Condenser Exhauster for hogging and holding service in power generation. The system consists of liquid ring vacuum pumps, separator, heat exchanger and ejector (optional) with total recirculation. Capacity: As per requirement

Condenser Exhausters

Available in sizes from 3 to 45 SCFM (6 to 87 kg/hr)

DRY SCREW VACUUM PUMP

Swam dry screw vacuum pumps are designed under SWAM’s unique screw profile engineering to fulfill wide range of chemical and industrial processes. It is operating by rotating a paired screws that efficiently admit gases from inlet into the pump inside and compress through the screw’s swept volume toward the discharge.

DRY-PRO VSB

Capacity up to 1,500 ACFM (up to 2,550 m3/h)

DZM multi-claw pump

Dry multi-claw vacuum pumps DZM multi-claw pump A complete multi-claw vacuum pumping system in a box. A solution perfectly designed to meet your larger process demands. Plug & play This concept of design greatly reduces complexity and installation costs compared to other central systems designs. The package not only consists

DZS Dry claw pump

Dry Vacuum & overpressure pumps DZS Dry claw pump The simplicity, robustness, efficiency and contaminant handling capability of the DZS design pumps make them the smart choice for your application. Built to your exact standards and quality, the new dry claw pump provides you with a trouble-free and cost-effective solution.

ENER-JET Steam & Air Ejectors

Steam and air ejectors are the ideal solution for industries including oil & gas, chemical, and electrical power.

Fluid Couplings

Fluid Coupling Ideally suitable for smooth and jerkless start and also act as energy saver. APPLICATIONS Conveyors Rotary Kiln Travelling Grate Nodulizer Apron Conveyours Elevator Drives Separator Drive Bulk Materials Handling Conveyor Drive Bucket Slew Belt Conveyors Screw Conveyors Bucket Elevator Stacker Reclaimer Drive – Bucket Wheel Slurry Pump Agitator